Whirlpool Dryer Repair Service in Howell, Fenton, Brighton, and Grand Blanc, Michigan. 

Of all the clothes dryers I repair, Whirlpool Dryers are my favorites. Call today, and there's a good chance it will be restored today. 

• Thermal fuse blown: The most common cause. Located on the blower housing or heating element, this fuse blows if the dryer overheats.
• Door switch failure: If the door switch is defective, the dryer won't start even when the door is closed.
• Broken drive belt: A snapped belt will prevent the drum from turning, and many models won't start without proper belt tension.
• Defective start switch: The push-to-start button can wear out over time.

• Heating element burned out: Electric dryers use a heating element that can break or short out.
• Gas valve solenoids failed: Gas dryers require functioning solenoids to open the gas valve.
• Thermal cut-off fuse: A safety device that stops heating if temperatures get too high.
• High-limit thermostat: Regulates maximum temperature and can fail in the open position.

• Clogged lint screen or vent: Restricted airflow is the #1 cause of extended drying times.
• Blower wheel obstruction: Lint buildup on the blower wheel reduces air circulation.
• Worn drum seals allow heated air to escape rather than circulating through clothes.
• Defective moisture sensor: Prevents the auto-dry cycle from working correctly.

• Worn drum rollers: Support the drum and cause rumbling sounds.
• Damaged idler pulley: Creates squeaking or squealing noises.
• Worn drum glides/felt seals: Cause scraping sounds when the drum rubs against the housing.
• Blower wheel obstruction: Produces rattling or thumping sounds.

• Whirlpool Cabrio: Top-load companion dryers with advanced moisture sensing
• Whirlpool Duet: Front-load stackable models, known for high efficiency
• Whirlpool Centennial: Budget-friendly, reliable, traditional design
• Whirlpool WED/WGD Series: Standard electric (WED) and gas (WGD) models

Find your model number on a sticker or metal plate:

• Inside the door opening (most common)
• On the back panel near the power cord
• Behind the lint filter housing

• Thermal fuse replacement: $100-$200
• Heating element replacement: $150-$300
• Drive belt replacement: $120-$250
• Drum roller replacement: $150-$350
• Door switch replacement: $100-$175
• Idler pulley replacement: $125-$225

Costs include parts and labor. Actual prices vary by location and service provider.

• Average lifespan: 10-13 years
• Expected cycles: 8,000-12,000 loads
• Factors affecting longevity:
  • Regular maintenance (cleaning the lint system)
  • Load size (overloading causes premature wear)
  • Usage frequency
  • Proper installation and ventilation

• The dryer is less than 8 years old
• The repair cost is less than 50% of the replacement cost
• Only one component has failed
• The dryer has been well-maintained

• Multiple major components need replacement
• The dryer is over 12 years old
• Repair costs exceed 60% of a new unit
• Energy efficiency is significantly outdated

• Cleaning the lint trap and vent system
• Replacing the lint screen
• Checking and resetting the thermal fuse (if comfortable with disassembly)
• Replacing the drive belt (with proper guidance)

• Gas dryer repairs (gas line work requires certification)
• Electrical issues beyond simple fuses
• Drum removal and bearing replacement
• Control board diagnostics and replacement
• Any repair requiring specialized tools

1. Clean lint screen after every load - Improves efficiency and prevents overheating.
2. Inspect and clean the exhaust vent annually - Reduces fire risk and improves performance.
3. Check drum seals periodically - Replace if torn or worn
4. Avoid overloading - Puts excessive strain on the motor and rollers
5. Level the dryer properly - Prevents premature wear on drum support components
6. Use appropriate settings - High heat on delicate items can damage sensors

• Standard Whirlpool warranty: 1 year parts and labor
• Extended warranties: Available through Whirlpool and third-party providers
• Parts availability: Whirlpool maintains parts inventory for models up to 10 years old
• Check warranty status: Visit Whirlpool.com with your model and serial number

• Proper diagnostics: Technicians can identify root causes, not just symptoms
• Warranty protection: Professional repairs often include service guarantees
• Safety: Especially critical for gas dryers and electrical components
• Time savings: Experienced techs complete repairs in 1-2 hours
• Genuine parts: Access to OEM Whirlpool replacement parts

Need Whirlpool dryer repair? Contact ApplianceRepairToday.com for fast, professional service from certified technicians. We service all Whirlpool dryer models and offer same-day appointments in most areas.